How to Reset Deebot Vacuum [All Models] – Two Options for You

It’s a hassle if your Deebot vacuum isn’t working properly. Thus, the first thought that might come to mind is resetting it. Do you want to know how to reset deebot vacuum?

Well, two reset options are available, which are complex and soft reset. The hard reset can be done in 2 ways. One is by pressing the reset button until you hear 3 beeps.

Another is by using the remote. A soft reset can also be done in 2 ways. One is by powering it off, and another is by removing the battery.

But there’s so much more to know about the Deebot reset and troubleshooting. Thus, we’ve written this whole article just for you!

How to Reset Deebot Vacuum? Step-by-Step Guide

Resetting your Deebot vacuum is a fairly easy process. You already know that there are different reset options available. First, let’s see what they are briefly:

Now, let’s learn about them in detail.

Deebot Vacuum Hard Reset:

Hard reset makes sure that your deebot returns to default settings. In this case, all saved data on your deebot will be permanently deleted. Thus, you won’t have any cleaning modes or scheduled cleanings. The Wi-Fi connection will be rebooted.

Your Deebot will also be removed from the Ecovacs Home app. Basically, your Deebot will be completely rebooted.

Method 1: Using Reset button

The first method uses the reset button. But where is the reset button in deebot? The reset button can be found under the top cover or on the bottom of the device, near the dustbin (for some models).

It’s a small button located beside the power button. Although, you can’t press it using your fingers. You’ll have to use something small like a pen, toothpick, or pin.

Now, we’ve prepared a step-by-step guide for resetting the Deebot vacuum:

• Step 1: Open the top cover and locate the power button. It’s a comparatively big red button. Press it to turn on the vacuum. It should display a blue light and beep once when it’s on.
• Step 2: Locate the reset button beside the power button. Take a pen, toothpick, or needle and press the reset button with it. Press for about six seconds until you hear three beep sounds.

With that, your Deebot vacuum has been reset. You can also check out this video for a visual demonstration: How to Factory Reset ECOVACS DEEBOT OZMO T8 Vacuum Robot – Restore Default Settings to Fix Vacuum

Method 2: Using Remote

The next option is to use your Deebot remote. This reset option is also called the factory reset. Here’s how you can do it:

• Step 1: Take the Deebot remote and press and hold the start/ pause button for three seconds.
• Step 2: Wait for a short sound. After that, your Deebot clock will be reset to 00:00.

With that, the factory reset has been successfully completed.

Deebot Vacuum Soft Reset:

Soft reset only removes the temporary data of your Deebot. It’s good for small lags in your and malfunctions in your Deebot.

Method 1: Using Power Button

You only need to use the power button here. Just follow the steps below:

• Step 1: Turn off the Deebot by switching the power button to the O position. Keep it powered off for a few minutes.
• Step 2: Turn on the Deebot by switching the power button to the I position. The Deebot will reboot, which will take about forty seconds.

With this, the temporary memory should be cleaned.

Method 2: Removing Battery

Removing the battery forces your Deebot to restart. Here, you can follow these steps:

• Step 1: First, turn off the Deebot in the same way as before.
• Step 2: Then, turn the device upside down. You’ll be able to see the battery cover.
• Step 3: Open the battery cover by removing the screws using a screwdriver. Then remove the battery.
• Step 4: Keep the battery removed for one minute to clear the temporary memory. Then, reattach the battery and its cover.
• Step 5: Turn the Deebot on.

With that, your Ecovacs Deebot soft reset should be perfectly done.

Is The Reset Process Same for All Deebot Models?

Yes, the reset process is the same, although specific instructions may vary depending on the model. Even if you are wondering how to reset ecovacs deebot n79s, dn622, or any models, follow the same process.

This guide should work for any Ecovacs Deebot mode, but it’s better to be certain. So, you can check the manufacturing guide to be sure about the details.

Important to note that the reset will erase any personalized settings or cleaning schedules set on your Deebot vacuum.

So, you must check the user manual for detailed instructions specific to the model you own. However, you may read about how to reset your Deebot battery if your Deebot has any battery issues.

When Do I Need to Reset My Deebot?

Not all problems require a reset. They have to be solved differently. Although, in some cases, resetting is a must. Thus, let’s get to know when a reset is necessary and when it’s not.

Minor Issues Which Don’t Need Reset

Some of the technical problems below don’t require a reset. Rather they have to be solved in a different way. Here, we’ve tried to mention them.

Wheel Malfunction

One of the common problems of Deebot is a driving wheel malfunction. If your Deebot beeps once, check for tangled hair, debris, or dust on the wheel. Remove it, and the Deebot should work fine.

If it beeps thrice, turn the device upside down and press the driving wheel. A proper driving wheel should produce a clicking sound. If you can’t hear it, contact customer service.

Brush Malfunction

There are two types of brush on the Deebot. The main brush and the side brush. If you hear three beeps, it’s probably the main brush; if you hear six beeps, it’s the side brush. In both cases, the main problem is tangled hair, debris, or dust.

Just remove the hair and clean the debris/dust to solve the problem.

Dust Bin Malfunction

If you hear four beeps, it’s probably a dustbin malfunction. In that case, remove and reinstall the dustbin properly. If the dustbin is full, be sure to empty it.

Anti-Drop Sensor Malfunction

Lastly, a malfunctioning anti-drop sensor might beep seven times. Check if the sensor is clean. If it’s not, clean it properly. Unlike the previous issues, reset is a must for the scenarios below:

Deebot Transfer to Next Owner

If you are selling your Deebot, factory reset it first. This will ensure that all your data has been removed. It’ll also wipe away the data from the previous Ecovacs Home account. Thus, the new owner will be able to customize everything according to their liking.

Troubleshooting Not Helping

In some cases, even after troubleshooting, the Deebot might malfunction. In that case, you can reset the Deebot as a last try. If it’s not solved yet, ask for professional help.

Frequently Asked Questions [FAQ]

Bottom Line!

The Deebot is an innovative new robotic cleaner that helps to keep your home clean and dust free. But sometimes you may face some problems in your Deebot and need to fix them.

By resetting the vacuum, you can solve any Deebot malfunctions or issues. But how? Hopefully, now you know how to reset Deebot vacuum. Even so, we have one last tip for you.

After cleaning the main brush and reinstalling it, be sure that it’s completely dry. Thanks for sticking with us till the end.